Handmade leather, built for the long way round.
PK | EN
  • Reinforced ankle, heel, and toe protectors absorb impact at high-stress contact zones during gear changes and emergency braking.
  • 1.2–1.5 mm cowhide leather resists tearing and puncturing; slip-resistant, oil-resistant rubber sole grips wet pavement and fuel-slick garage floors.
  • YKK coil zipper closes smoothly without snagging; heavy-duty leather shifter pad prevents wear-through on the inside of the boot during thousands of shifts.

Motorcycle riding boots black cut from 1.2-1.5mm cowhide in black.

Outer Layer

  • 1.2–1.5 mm cowhide leather upper provides durable protection and consistent grip during extended rides.
  • Reinforced Ankle Protector shields the ankle joint from impact during shifts and cornering, reducing injury risk at the highest-stress contact point.
  • Reinforced Heel Protector absorbs shock from footpeg pressure and brake engagement, extending boot longevity and rider comfort on long rides.
  • Reinforced Toe Protector guards the forefoot during gear changes and slide contact, critical protection for riders who shift aggressively or practice on track.
  • Heavy-Duty Leather Shifter Pad reinforces the gear-change zone with extra cowhide leather, preventing wear-through on the inside of the left boot during thousands of shifts.
  • Slip-Resistant and Oil-Resistant Rubber Sole delivers consistent traction on wet pavement, fuel-slick garage floors, and track surfaces; engineered for both street and circuit use.
  • YKK coil zipper ensures smooth, consistent closure without snagging on leather or lining during frequent on/off cycles.

Inner Layer

  • Breathable construction allows airflow around the foot, reducing moisture buildup during warm-weather or high-speed commutes.
  • Lightweight design minimizes bulk so the boot moves naturally with your foot and ankle, critical for precise throttle and brake control.

Boot Customization & Options

  • Standard sizing ships 10–15 working days from order confirmation.
  • Sizes for the motorcycle riding boots Black follow the Size Guide on this page.
  • Also listed as Black leather motorcycle boots.
  • This is the cowhide riding boots reinforced protection configuration.

Product Specifications

Product Code MLB-1010-EN
Collection Footwear
Availability In stock, handcrafted to order
Craftsmanship Handmade & tailored leather gear since 2009
Product Type Motorcycle Boot
Category Footwear, Motorcycle
Best Use Street riding, commuting, touring, track days, aggressive gear changes
Material 1.2–1.5 mm cowhide leather
Construction Hand-stitched made-to-order; YKK coil zipper; reinforced ankle, heel, and toe protectors; heavy-duty leather shifter pad
Closure / Fit System YKK coil zipper
Protection Reinforced Ankle Protector, Reinforced Heel Protector, Reinforced Toe Protector, Heavy-Duty Leather Shifter Pad, Slip-Resistant and Oil-Resistant Rubber Sole
Made-to-Measure No
Standard Lead Time 10–15 working days from order confirmation
Brand Leather Collection
Standard (INCHES)
U.S. SIZE LENGTH (INCHES)
4.5 9.3
5 9.4
5.5 9.5
6 9.6
6.5 9.8
7 9.9
7.5 10.0
8 10.1
8.5 10.2
9 10.5
10.5 10.7
11.5 11.0
Standard (CENTIMETER)
U.S. SIZE LENGTH (CM)
4.5 23.5
5 23.8
5.5 24.1
6 24.5
6.5 24.8
7 25.1
7.5 25.4
8 25.7
8.5 26
9 26.7
10.5 27.3
11.5 27.9
Size Guide Diagram

How to Measure for a Perfect Fit:

  • Neck: Measure around the base of your neck where a collared shirt would fit.
  • Sleeve: Measure from the center back of your neck, over your shoulder, down to your wrist bone.
  • Chest: Measure around the fullest part of your chest, keeping the tape level under your arms.
  • Waist: Measure around your natural waistline, where you typically wear trousers.
  • Height: Stand straight against a flat wall without shoes and measure from floor to crown.

When you select "Custom Size (+ $95.00)" from the size dropdown, our master patternmakers hand-cut each leather panel to your exact body proportions. After checkout, our team contacts you to verify all 12 key measurements (chest, shoulders, sleeve length, waist, torso length, etc.) before production begins.

Standard handcrafted production takes 10 to 15 working days. Once tailored and quality-inspected, orders are dispatched via express tracked courier (DHL / FedEx Express), arriving within 3 to 6 business days worldwide.

Regular Viscose Lining: Our standard 100% breathable silk-soft viscose lining, offering smooth comfort and easy slip-on wear.
No Lining: Exposes the raw, unlined leather interior for authentic vintage motorcycle jackets.
Sublimated Print Lining: High-definition full-color inner artwork custom printed directly into the lining fabric.

Hang your jacket on a wide contoured wooden hanger to preserve shoulder shape. Keep away from direct sunlight and radiators. Condition every 6 to 12 months with natural leather cream or balm to maintain supple texture and moisture barrier.

SIZE GUIDE

Cowhide Leather Motorcycle Riding Boots Men Women Green

Standard (INCHES)
U.S. SIZE LENGTH (INCHES)
4.5 9.3
5 9.4
5.5 9.5
6 9.6
6.5 9.8
7 9.9
7.5 10.0
8 10.1
8.5 10.2
9 10.5
10.5 10.7
11.5 11.0
Standard (CENTIMETER)
U.S. SIZE LENGTH (CM)
4.5 23.5
5 23.8
5.5 24.1
6 24.5
6.5 24.8
7 25.1
7.5 25.4
8 25.7
8.5 26
9 26.7
10.5 27.3
11.5 27.9

Your bag (0)

Your bag is empty

Find something to make your own.

Start shopping